Responsive Menu
Add more content here...
Quick Enquiry

Product Specification :

  • Power Range : 0.37 kW to 1.1 kW (0.50 HP to 1.5HP)
  • Speed : 2880 RPM
  • Version : Single Phase 160V to 230V, 50Hz, AC Supply
  • Head Range : 14 Mtr. to 96 Mtr.
  • Discharge Range : 70 LPM to 15 LPM
  • Outlet Size in Inch : 1.25”
  • Degree of Protection : IP 58
  • Direction of Rotation : Counter clockwise from driving end -1 pH
  • Minimum Cooling : 1pH
  • Flow along the motor : 0.15 m/sec.
  • Type of Duty : S1 (continuous)
  • Method of Starting : 1ph-Capacitor
  • Maximum Starts Per Hour : 20 times

Salient Features

Motor portion covered with corrosive resistance Stainless steel J4 shell

More durability and hygiene

High operating efficiency

Specially designed thrust bearing to withstand high axial thrust load

Extremely hardwearing water lubricated bearing

Thread type motor construction ensures service feasibility

Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set

Designed for wide voltage operation

Best alternative for JET & Compressor pump set

Additional intermediate bearing in higher stage pumps.

Material Of Construction - Motor

  • Oil Seal : Nitrile butyl rubber
  • Motor Shaft : SS-420
  • Motor Body Pipe : J4
  • Motor Bush : LTB-4 / Teflon
  • Thrust bearing assembly : SS – 420 & Teflon
  • Diaphragm : High Nitrile Butyl Rubber
  • Motor Base : SS-410
  • Housing Set : Cast Iron

Material Of Construction - Pump

  • Check Valve Housing : Cast iron
  • Check Valve : SS-410 / Nylon
  • Outer Shell : J4
  • Bowl : Noryl
  • Counter Bush : LTB-4
  • Pump Bush : NBR / LTB 4
  • Pump Sleeve : SS-410
  • Suction : Cast iron
  • Pump Shaft : SS-410
  • Coupling / Pump Couple : SS-410